This wiki is out of date, use the continuation of this wiki instead

Loops

From FenixWiki

Revision as of 21:26, 1 May 2007 by Sandman (Talk | contribs)
Jump to: navigation, search


Contents

Loops

LOOP-END, WHILE-END, REPEAT-UNTIL, FOR-END, FROM-END

Loops are used to create iterations in your code. The statements between these words will get repeated depending on a condition. There are several types of loops:

Loop ... End

Loop
    // Statements
End

The statements will be repeated indefinitely.

While ... End

While(<condition>)
    // Statements
End

The statements will be repeated while the condition is fulfilled.

Repeat ... Until

Repeat
    // Statements
Until(<condition>)

The statements will be repeated until the condition is fulfilled.

For ... End

For(<initializer>;<condition>;<counting expression>)
    // Statements
End

First, the initializer will be executed.
Then the statements will be repeated until the condition is fulfilled.
After each run of the statements, the counting expression is executed.

From ... End

From <variable>=<startvalue> To <endvalue> Step <incrementvalue>
    // Statements
End

First, the startvalue will be assigned to the variable. Then the statements will be repeated and the incrementvalue added to the variable. When the variable is greater than the endvalue, the loop ends. Note that the incrementvalue has to be a constant. The Step <incrementvalue> is optional.

Manipulating a loop

There are more ways to manipulate a loop, both internally and externally.

If the code inside a loop reaches a break; statement, the loop is immediately ended. This is particularly useful in the Loop-End loop, because that one has no other way to end the loop and continue code beneath it.

If the code inside a loop reaches a continue; statement, it executes the possible count- or stepping statement and then continues to the checking of the condition. So in a Repeat-Until loop, it would just skip to the Until() part.

If the loop is run in a specific process, one can influence the execution of the loop, by changing the state of that process, by use of signal() and signals.

Example

Program loops;
Const
    startvalue     = 1;
    endvalue       = 8;
    incrementvalue = 2;
End
Private
    int c;
End
Begin

    // LOOP
    c = startvalue;
    Loop
        say("Loop: " + c);
        c+=incrementvalue;
        if(c>endvalue)
            break;
        end
    End
    say("End Loop: " + c);

    // WHILE
    c = startvalue;
    While(c<endvalue)
        say("While: " + c);
        c+=incrementvalue;
    End
    say("End While: " + c);

    // REPEAT
    c = startvalue;
    Repeat
        say("Repeat: " + c);
        c+=incrementvalue;
    Until(c>endvalue)
    say("End Repeat: " + c);

    // FOR
    For(c=startvalue;c<endvalue;c+=incrementvalue)
        say("For: " + c);
    End
    say("End For: " + c);

    // FROM
    From c=startvalue To endvalue Step incrementvalue
        say("From: " + c);
    End
    say("End From: " + c);

    Loop
        frame;
    End

End

Used in example: say(), constants

In the example, all the loops do the same thing, illustrated by the use of the same constants.

Personal tools