- This wiki is out of date, use the continuation of this wiki instead
Coordinatenumber flags
From FenixWiki
Definition
Coordinatenumber flags are used to set which scroll or mode_7 coordinate system should display a process, by assigning them to the local variable cnumber of that process. This only has influence on scrolls or mode_7 coordinate systems, not on the screen's coordinate system.
How to change the used coordinate system, see ctype and its constants.
Constant | - Value | - Description |
C_0 | - 1 | - Display the process in the scroll/mode_7-view with ID 0 |
C_1 | - 2 | - Display the process in the scroll/mode_7-view with ID 1 |
C_2 | - 4 | - Display the process in the scroll/mode_7-view with ID 2 |
C_3 | - 8 | - Display the process in the scroll/mode_7-view with ID 3 |
C_4 | - 16 | - Display the process in the scroll/mode_7-view with ID 4 |
C_5 | - 32 | - Display the process in the scroll/mode_7-view with ID 5 |
C_6 | - 64 | - Display the process in the scroll/mode_7-view with ID 6 |
C_7 | - 128 | - Display the process in the scroll/mode_7-view with ID 7 |
C_8 | - 256 | - Display the process in the scroll/mode_7-view with ID 8 |
C_9 | - 512 | - Display the process in the scroll/mode_7-view with ID 9 |